Traditional Climbing: 7. Cam Placements - Hand Sized Cams
Traditional Climbing
•
2m 34s
In this video we review considerations for placing hand-sized cams.
1. Pull the cam’s trigger until the lobes are about 70-80% cammed (100% is when you pull the trigger as far as it will go). If the cam is too small for the crack, we say it is “tipped out” (see video for visual).
2. Look for sections of parallel cracks or pods when placing cams. They are designed to protect these types of crack features. Constrictions are protected using passive gear, or chocks, like stoppers or hexes. Pods are great for cams because they help prevent the cam from “walking” further back into the crack—this is especially useful for larger cams which tend to walk more than smaller ones. Avoid uneven cracks (which will make the four cam lobes uneven) or sections that widen in the direction of pull (yikes!).
3. Always place cams so that they are angled in the direction of pull, whether for anchor use or protection from potential fall. Placing a cam perpendicular to the angle of pull (or fall!) will cause the cam to rotate when weighted (which can change the position of the lobes) or bend the stem of the cam.
4. After the piece has been placed, give the cam a pull test and check that all lobes are even.
We hope you found this video helpful. Feel free to comment below with questions or thoughts!
Please remember, climbing is inherently dangerous. Climb at your own risk.
Up Next in Traditional Climbing
-
Traditional Climbing: 8. Cam Placemen...
In this video we review considerations for placing small cams. Small cams are cams that range from 0.5 - 2.5 inches in size. Because they are smaller, they also have a proportionally smaller range of crack sizes they will fit.
- Less leeway for placement size. Due to the smaller size, a small ...
-
Traditional Climbing: 9. Cam Consider...
In this video we review considerations between using a 4 lobe (Alien) vs 3 lobe (Metolius TCU) cams. Both can be useful, and have different applications (see below):
4 Lobe:
- Wider than the 3 lobe, so not ideal for shallow cracks.
- More surface area than 3 lobe, can inspire more confidence... -
Traditional Climbing: 10. Retrieving ...
In this video we review considerations for retrieving stuck cams. Cams can get stuck for many reasons. Perhaps it was incorrectly placed, jammed into place when fully cammed, i.e. by a freaked out climber on lead in desperate need of protection. Sometimes the rope movement after the leader climbs...
